Well I had to move the signals in order to go hard over to either side with the steering. So with some resrearch and ideas from this site I did the following: Drill a 5/16" hole to run the wires through then hold the light up to mark the mounting holes:
Then mount the new LED signal you got at Wal-Mart for $7.00 with a couple of machine screws:
Wire the new signal to where your old signal plugged in and while you have the number plate off be sure to go to schucks and spend $6.00 and get this flasher and replace your OEM one with it. You need this to run the LED lights:
Then we now have new out of the way signals that will last for some 100,000 hours give or take and IMO don't look half bad either:
_________________
Twenty years from now you will be more disappointed by the things you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover." ~Mark Twain
2007 XR650L
Home 
Subject: New Relocated Turn Signals to Clear The New Tank 
3/1/2009, 5:18 pm
But thanks guys.
