Wr250R Powder coat job!

YamWOW! · Subject: Wr250R Powder coat job! 1/4/2009, 6:00 pm

Since the weather was freezing we did a small powder coat job at fellow member Focker's house. Tried not to get to Pimped out.

_________________
YamWow! It's made in Japan. You know the Japanese make good stuff!

Focker · Posts: 57 Join date: 2009-01-04 Location: Tri-Cities WA

That's the best looking WR I've seen...Wait...It's the only one I've seen. I'm thinking I want one......Ok...I'm over it. Totally over it! big

P.S - Put a space between the pix man.

toothy · Subject: Re: Wr250R Powder coat job! 1/4/2009, 8:57 pm

Cool.

What's the home powder-coat process like?

phantom30 · Subject: Sharp Looking Bike!!! 1/5/2009, 11:43 am

Nice job.........only I don't see any dirt & mud on it!! I just got mine before the snow started flying.....didn't get enough miles on it to change factory oil.. Looking forward to coming to "Tech Day" for suspension mods info. I want to "Float-like-a-butterfly" over bumpy roads/trails!!!

Buck Nasty · Posts: 64 Join date: 2009-01-05 Age: 31 Location: Bend, OR

That looks great! Nice job! thumb

Focker · Posts: 57 Join date: 2009-01-04 Location: Tri-Cities WA

toothy wrote:

Cool.

What's the home powder-coat process like?

Basically we use my garage and stuckinmud's PC setup.

The parts are sandblasted at an undisclosed location.
After prepping the metal we shoot the powder using a Harbor Freight PC gun.
Then toss it in the oven for baby & me.

The best thing is after the part cools (usually 15-20 min) it's ready for install!
As for the mess...We've made a powder booth but honestly don't use it much. I blow most of the leftover powder out the door and hose out the garage on big jobs.

marbec1a · Subject: Nice job 1/7/2009, 8:15 pm

Looks like something from a high end shop. You guys did a great job. Is the Yamaha logo on the swing arm also powder coated? It looks outstanding. cheers

Hodakaguy · Subject: Re: Wr250R Powder coat job! 1/7/2009, 8:26 pm

marbec1a wrote:

Looks like something from a high end shop. You guys did a great job. Is the Yamaha logo on the swing arm also powder coated? It looks outstanding. cheers

Yeah the powder coating is very trick. Looks factory!

I have a Vinyl graphics plotter so making custom stickers isn't a problem naughty

You can check out StuckinMud and Myself doing LOTS of powder coating in our last winter project here: CLICK HERE

Hodakaguy

_________________
This thread needs more cow bell!

03 XR650R - Oh Yeah....Plated Baby!
08 TW200 - Adventurized
73 Honda CL350 Scrambler - FOR SALE

oldx · Posts: 17 Join date: 2009-01-07

Looks very good for a home project. Nice work guy's.