I'm probably going to regret this but.....Up for sale is my 03 XR650R....Plated in WA state with current tabs.

Own a Legend. If you are looking for a XRR look no further, this one is absolutely turn key, SUPER CLEAN and ready to ride! All the known XRR issues have been taken care of and a TON of accessories have been added, this bike is ready to take anywhere! Just had a complete service including fresh oil and filter (Amsoil 20-50W), Valves adjusted, chain
lubed, air filter cleaned ect.

Only 1900 Miles since new, the dealer installed the Baja Designs street legal kit before it left the showroom, the miles are Original and Accurate Miles. The rear tire is the second one on the bike, the original still had good tread left but I wanted a DOT tire so I removed them and installed Dunlop 606's front and rear.

All bearings were re-lubricated at 400 miles. This includes the steering head bearings, shock linkage bearings and swingarm bearings. The forks were flushed and Syn fork oil installed.

I have made a TON of Key mods to make this an Ultimate ADV bike. The long list in no particular order includes:

*Trailtech 8" Race Light - 100W Bulb installed
*200W Ricky Stator (100W DC for blinkers ect, 100W AC running directly to light)
*Heavy Duty AC Voltage Regulator for the Headlight AC Circuit
*All Electrical Connectors are Soldered Gold Plated High Amp RC Aircraft Connectors for Reliability.
*Anodized Billet Front Brake Line Holder (Trailtech)
*Baja Designs Street Legal Kit, lights, blinkers ect
*Baja Designs Speedo with Custom Mount to work with the BRP Setup and Trailtech Light
*Cycra Hand Guards with Custom Installed Zeta LED Blinkers built in. Has a Electronic Flasher that regulates the flash rate to normal even with the LED's installed.
*KTM Radiator Fan - Great piece of mind. If your on a long first gear climb or stuck at a light in 100deg weather its nice to have!
*Unabiker Radiator Guards
*Tanker Brace - Accerbis Tank Brace and Radiator Guard "I manufacture these"(This combined with the tank and the Unabikers make a indestructible radiator setup)
*Highway Dirt Bikes Billet Front Brake Perch & Switch Assy. (The upper switch turns the Headlight on and off, the lower switch activates the radiator Fan).
*KTM Folding Mirror - This Mirror Actually Works! Mounted on a Billet Clutch Perch Clamp.
*BRP Billet Black Anodized Upper Tripple Clamp Assy Setup for a Scotts Undermount Steering Damper. $$$$$$ (Everything is included for the damper setup except the Scotts Damper itself, its the one thing I'm keeping off the bike. Throw on a damper and in and its ready to go)
*Pro-Taper Windham Bend Bars
*Accerbis 6.3 gal Desert Tank. I absolutely love this tank, if your just riding local only put a few gallons in, if your going to do
distance then just fill it up. I've found it works great for me in all conditions, including tight single track.
*XR's Only Billit Gas Tank Mounts - Makes the Accerbis Rock Solid and gives you piece of mind when your out in the middle of no where.
*Heat Reflective Tape Installed On Underside of Fuel Tank - Keeps Your Fuel Cooler.
*SDG Gripper Seat Assy.
*Updated XR's Only Thermostat - The Stock Thermostats Fail Early.
*CV4 Silicone Radiator Hoses for the Utmost Reliability.
*Edelbrock Pumper Carb - This is a MUST HAVE on the BRP. Starts first or second kick every time....Hot or Cold. Idles like it has fuel injection, if you fall over the bike won't flood...just pick it up and give it one kick and its back running again. Plus you can adjust the fuel mixture on the fly for altitude changes!!!! A HUGE benifit for the ADV rider, no more carrying extra jets ect.
*Custom Built Idle Cable Adjuster Holder for the Edelbrock Carb. No more Idle Cable Flopping Around. Makes it a easy reach to adjust your idle.
*Aluminum Clutch Side Guard, Custom Powdercoated Black. Protects the light weight but fragile stock magnisium 2 piece clutch cover.
*IMS Pro Foot Pegs - The Ultimate grip!
*Fully Uncorked, HRC Tip installed in pipe, full bore intake ect.
*Edge 2 LED Tailight Assy. Custom Mounted on top of the fender to keep it out of harms way, also has a custom licence plate backing to keep your plate in good shape.
*XR's Only Case Saver - Another Must Have
*XR's Only Heavy Duty Chain Guide
*Utah Aluminum Skid Plate
*Dunlop 606 Tires
*Setup for a Giant Loop Luggage System. Just buy a Giant Loop and its Ready to bolt on!
*Man Funnel - Makes Oil Changes super easy, no pulling the skid plate!
*All Wiring is relocated under the seat and out of the way, Keeps the steering head area cleared up and looking good. Also keeps the vitals out of harms way.

I'm sure I'm forgetting something else also. Stock Honda Brand Oil was used until 400 miles, It's had Amsoil 20-50W ever since.....at ridiculously close change intervals (I'm super particular at keeping fresh oil in my bikes).

So why am I selling.....I've drank the orange cool aid and I'm going to try out a KTM. I wish I had the money to keep the XRR and get a KTM but it's not going to happen...so up for sale goes my XRR.

Price: $5800

If you have any questions on the bike please PM me.

Thanks

Hodakaguy

Wow.....Tom......ummmmm...yeah....

What about the OBDR?

I guess you'll either be riding the BRP or a new KTM.........